Infant Car Seat Bases

Outings with your newest addition should always be safe, stress-free and a snap. Mission accomplished with our PIPA’s base – the perfect companion for our superbly secure and cleverly chic infant car seat.

Sporting a steel stability leg– plus its smart, simple and secure true lock™ installation system – our base assures ultimate baby safe keeping. Along with a 5-second install and green-for-go safety indicators, this base makes set up a cinch.

• True lock™ base installation makes set up swift, simple and above all – safe
• Accommodates all Pipa car seats
• Installs to car in less than five seconds with two easy and instant steps
• Steel stability leg helps minimize forward rotation during impact by up to 90%*
• Colored indicators on the stability leg and lower rigid attachments (LATCH) minimize user error
• Dual bubble level indicators confirm correct angle
• Easy base release buttons make switching between vehicle’s a snap
• Stability leg folds under base for storage when not in use
• Multi-position base accommodates various car seat angles
• *When compared to a system that is not using a stability leg

Your life now is focused on firsts—first words, first steps. Our innovative RELX base is one of the first to feature an adjustable stability leg to fit in center seating positions and a wider range of vehicles. It also features a strong steel-reinforced rigid latch that has four lockable positions to achieve a closer fit of the base against your vehicle seat.
 
Colored indicators take the guesswork out of installation, and the bubble-free, numbered, on-the-go recline means you can change positions as your baby grows without having to uninstall the base. The lock-off with easy-access belt path makes it simple to install with the vehicle belt. The smooth platform won’t take a toll on your vehicle seats, and the low profile allows for easier loading of all Nuna PIPA series infant car seat.
 
Problems solved—all of them. What else is left? Ah, yes. Relax.

• 5 second True lock™ installation makes set up swift, simple and above all – safe.
• Crumple zone within the stability leg absorbs impact and minimizes force transferred to baby.
• Colored installation indicators confirm correct connections to the vehicle.
• Open belt bath for easier install.
• Automatic rigid latch storage.
• 4 position adjustable rigid latch.
• Steel stability leg helps minimize forward rotation during impact.
• Indicators on stability leg turn green when in proper contact with vehicle floor.
• Compatible with all Nuna PIPA series infant car seats.

An extra UPPAbaby Mesa/Mesa V2 Infant Car Seat Base allows you flexibility and ease of travel. Ideal for multiple family vehicles – no more swapping car seat bases between relatives, babysitters or spouses! Our SmartSecure™ System featuring self-retracting mini LATCH connectors and a tightness indicator makes correct installation quick and easy.

• Red-to-green tightness indicator
• Streamlined, low-profile base
• Smooth, finished base bottom won’t damage car interiors
• Infant carrier not included

An extra MESA MAX infant car seat base allows you flexibility and ease of travel. Ideal for multiple family vehicles – no more swapping car seat bases between relatives, nannies or spouses!

• Load leg for increased safety & reduction in head/neck injury
• Anti-Rebound+ Panel for increased safety
• Bubble level indicators on both sides to aid in getting correct angle during installation
• Built-in lock off for secure seatbelt installation
• Streamlined, low-profile base with finished bottom
• SmartSecure System + Red-to-Green indicators

The Doona LATCH Base is compatible with the Doona Infant Car Seat and is intended for rear-facing use only. It ensures correct installation every time. The Doona LATCH Base has been designed, tested and certified according to US safety standards and regulations and conforms to all applicable Federal Motor Vehicle Safety Standards. It can be installed in the vehicle either with the LATCH system or with the vehicle’s belt. Its secure click-in and easy click-out mechanism provides effortless mobility for parents on-the-go.

• Quick and simple vehicle installation

• Compliant with US regulations FMVSS 213

• The height adjustment mechanism and easy-to-read level indicators ensure proper seat angle adjustment and positioning

• LATCH connector system facilitates quick and simple installation and easy release

• Integral belt locking clips enable snug and effortless vehicle seat belt installation

• Doona installation Indicator confirms that the Doona is safely locked in position

Simply, Accurately, Secure... Every Time
The KeyFit^® 35 Base incorporates intuitive and top-rated installation features to help ensure a simple, accurate and secure install…every time. Premium LATCH connectors are easy to attach and remove from your vehicle, while the SuperCinch^® force-multiplying tightener helps achieve a secure fit to the vehicle seat using a fraction of the effort. One-hand ReclineSure^™ spring-loaded leveling foot works in tandem with RideRight^™ bubble levels to help verify and achieve proper car seat angle. The LockSure^® steel-reinforced belt system helps achieve a secure fit with the vehicle belt.

• Versatile stay-in-car base accepts all KeyFit^® Infant Car Seats with intuitive, click-in design
• Anti-rebound bar provides added stability and more legroom for every KeyFit^® Infant Car Seat
• Top-rated installation features make it the easiest to install correctly
• Premium LATCH connectors for easy attachment & removal
• SuperCinch^® force-multiplying LATCH tightener
• ReclineSure^™ leveling foot and RideRight^™ bubble levels
• LockSure^® steel-reinforced seatbelt locking system
• From the makers of the top-rated KeyFit^®

Usage
The KeyFit^® 35 Base is designed for use with all KeyFit^® Infant Car Seats, including KeyFit^®, KeyFit^® 30 and KeyFit^® 35.

Care and Maintenance
Sponge clean plastics using warm water and mild soap. Towel dry. Refer to the instruction manual for complete care and maintenance instructions.

The KeyFit^® Base is engineered with innovative features that make it the easiest infant car seat base to install simply, accurately, and securely, every time.

A ReclineSure^™ leveling foot and two RideRight^™ bubble level-indicators help achieve and verify proper angle in the vehicle seat. It’s also equipped with premium LATCH connectors and a SuperCinch^® tightener for a secure fit with a fraction of the effort! For alternate installation with the vehicle seat belt, clear belt routing and integrated lock-offs make it easy to position, tighten and lock the belt into place.

The KeyFit^® Base is designed for use with the KeyFit^® and KeyFit^® 30 infant car seats. (car seats sold separately)

• Click-in attachment for the KeyFit^® and KeyFit^® 30 infant car seats
• ReclineSure^™ leveling foot helps achieve proper base angle
• RideRight^™ bubble level-indicators verify base angle        
• SuperCinch^® LATCH tightener helps achieve a secure fit
• Smooth underside helps protect vehicle seats

For use with the CYBEX Aton G Swivel and Aton G Infant Car Seats, an additional base that provides on-the-go convenience for multi-car families. Easy to install and featuring an innovative 180-degree swivel, the Aton G Swivel base delivers functionality and ease for loading and unloading your child.

Compatible with:

• Aton G Infant Car Seat and Aton G Swivel Infant Car Seat